Dobrodošli na Auteh e-shop!


Garancija najnizih cijena

Marantz

SR7012 Black 9.2 Channel AV Receiver w/ HEOS Music Streaming

Šifra Proizvoda: 155210

Napiši prvi komentar za ovaj proizvod


Cijena za gotovinu / virman
/



Dostupnost:

Uskoro na lageru (Mogućnost Narudžbe) Mogućnost NarudžbeMogućnost NarudžbeUkoliko je za proizvod naznačeno da će ga biti uskoro lageru, znači da proizvod trenutno nemamo u u trgovini, ali ga je moguće rezervirati.
Molimo provjerite detalje u vezi mogućnosti rezervacije ovog proizvoda.

Provjeru možete izvršiti putem telefona:
+385 95 855 9005

ili emailom:
info@auteh.com


Kratak opis

Marantz je već dugo standard za AV risivere koji kombiniju snagu kućnog bioskopa s izvrsnom muzičkom sposobnošću, a SR7012 podiže taj standard za još jedan stepenik, kombinujući najnoviju tehnologiju za prepoznatljiv filmski doživljaj, uključujući punu kompatibilnost sa 4K i neuporedivo 3D dekodiranje surround zvuka, s preciznim audio inženjeringom i muzičkim doživljajem .

Pogledaj proizvod iz više kutova:


*Istaknute cijene, stanje zaliha i fotografije proizvoda su informativnog karaktera.
Prije svake kupovine i naručivanja proizvoda nazovite nas na jedan od naših telefona kako biste provjerili stanje zaliha i dobili najbolju cijenu. Tvrtka Audio Tehnologije d.o.o. zadržava pravo promjene cijena bez prethodne najave.

Audio Features

9-Channel Discrete Amplifier: The Marantz SR7012's powerful amplifier section features discrete high current output devices on all nine channels, and all amp channels are configured identically. Rated at 125 watts with 2 channels driven (8, 0.05%, 20Hz-20kHz), the SR7012 has the ability to drive lower impedance 4 speakers on all channels. The AV receiver's amplifier section employs Marantz's exclusive HDAM technology and Current Feed Topology for exceptional sound quality, dynamic range, and clarity.

  • HDAMs (Hyper Dynamic Amplifier Module): The SR7012 utilizes Marantz HDAM (Hyper Dynamic Amplifier Module) technology that provides superior low noise wideband performance in an all-discrete configuration, compared to conventional op amp ICs. Furthermore, the technology provides an ultra-fast slew rate for true wideband response and maximum dynamic range to deliver optimum sound quality with today's high resolution audio formats.
  • Current Feedback Topology: The SR7012 features high grade audio components that have been carefully selected. The whole internal circuit further enhances audio quality by delicately handling all signals via the Marantz-own HDAMs (Hyper Dynamic Amplifier Module) in Current Feedback topology before passing them on to the power stage to fire up the connected speakers.

Amplifier Assignment: The SR7012's nine discrete amplifier channels can be configured to accommodate your type of home theater setup. You can even connect up to eleven speakers at a time and the receiver will intelligently and automatically select which speakers need power based on audio source and surround sound format.

  • 11ch: Provides 11ch playback by assigning all nine internal amplifiers to the receiver's main zone and using an external 2ch amplifier for either the Front or Height 2 channels. Up to nine speakers can be powered by the receiver's amplifier, while two speakers are powered by an external amplifier. This amplifier configuration is compatible with up to 11.2ch and 7.2.4ch applications.
  • 9ch: Assigns all nine amplifiers within the receiver for the Main Zone to power the Front, Center, Surround, Surround Back, and Height speakers. You can connect up to eleven speakers to the receiver's amplifier and the receiver will automatically allocate the nine amplifier channels to power up to nine speakers at a time. This amplifier configuration will automatically switch between 9.2ch and 7.2.2ch / 5.2.4 applications.
  • 7ch Bi-Amp: Assigns all nine amplifiers of the receiver to the Main Zone with the front speakers bi-amped. Up to nine total speakers can be connected at one time - including Front, Center, Surround, Surround Back and Height speakers. The receiver will automatically switch for playback between 7.2ch and 5.2.2ch applications. The receiver's Height 2 amplifier channels are assigned to bi-amp the front speakers. A bi-amplification connection uses two amplifiers for one speaker. One amplifier is connected to the woofer section of a loudspeaker while the other is connected to the combined midrange and tweeter section. With this arrangement each amplifier operates over a limited frequency range, making its job easier.
  • 7ch + Zone 2 or Zone 3: The nine amplifier channels of the receiver are assigned to power a 7ch speaker system in the Main Zone and stereo speakers in either Zone 2 or Zone 3 (not both). Up to nine total speakers can be connected in the Main Zone - including Front, Center, Surround, Surround Back and Height speakers. The receiver will automatically switch for playback between 7.2ch and 5.2.2ch applications. The receiver's Height 2 amplifier channels are assigned to power Zone 2.
  • 7ch + Zone2/3-Mono: Assigns seven of the amplifier channels of the AV receiver for 7ch playback in the main zone and one amplifier each to Zone 2 and Zone 3 for mono audio in each zone. Up to nine total speakers can be connected in the Main Zone - including Front, Center, Surround, Surround Back and Height speakers. The receiver will automatically switch for playback between 7.2ch and 5.2.2ch applications. The receiver's Height 2 amplifier channels are assigned to power both Zone 2 and Zone 3 for mono sound.
  • 7ch + Front B: Assigns seven amplifier channels of the receiver to the Main Zone for up to 7ch playback and two amplifier channels to power another pair of front speakers in the Main Zone for stereo playback only. Up to eleven total speakers can be connected in the Main Zone - including Front, Center, Surround, Surround Back, Height, and Front B speakers. The receiver can automatically switch for playback between 7.2ch and 5.2.2ch application. The receiver's Height 2 amplifier channels are assigned to power the Front B speakers.
  • 5ch Bi-Amp + Zone 2: Assigns seven amplifiers of the receiver to the Main Zone with the front speakers bi-amped and two amplifier channels assigned to Zone 2 to power a pair of speakers in another room. The 5ch speaker system will consists of Front, Center, and Surround. The receiver's Height channels are reassigned to bi-amp the front speakers and power Zone 2. Surround Back speaker channels are not available in this mode. This amplifier configuration is not compatible with Dolby Atmos.
  • 5ch + Zone 2/3: Assigns five amplifier channels to the main zone for 5ch playback and four amplifiers to Zone 2 and Zone 3 for stereo playback in each zone. The 5ch speaker system will consists of Front, Center, and Surround. The receiver's Surround Back and Height amplifier channels are reassigned to power both Zone 2 and Zone 3. This amplifier configuration is not compatible with Dolby Atmos.
Note: The receiver's Height 1 & 2 amplifier speaker channels in a 9ch or 7ch amplifier configuration can be configured as Top Front, Top Middle, Top Rear, Front Dolby, or Surround Dolby for Dolby Atmos or  DTS:X.

Advanced 32-Bit D/A Conversion On All Channels: For optimum fidelity and the widest dynamic range with lowest distortion, the SR7012 features advanced reference-class 32-bit AKM D/A converters on all channels. This ensures consistent high fidelity and precise channel matching across all channels for the ultimate listening experience. In addition, the receiver utilizes a Hybrid PLL Clock Jitter Reducer to eliminate distortion caused by jitter errors for a more accurate reproduction of the recording the way the artist intended.

Compatible Digital Audio Formats: The AV receiver supports the following stereo & multichannel digital audio formats through its HDMI jacks and optical/coax digital inputs.

Digital Audio Connector Audio Signal Type Audio Signal Format
HDMI 2Ch Linear PCM 2ch, 32-192kHz, 16/20/24-bit
Multichannel Linear PCM 8ch, 32-192kHz, 16/20/24-bit
Bitstream Dolby DigitalDolby Digital EXDTS, DTS ES, DTS 96/24
High Definition Audio Bitstream Dolby Atmos, Dolby Digital Plus, Dolby TrueHDDTS:X, DTS-HD Master Audio, DTS-HD High Resolution, DTS Express
Optical/Coaxial 2Ch Linear PCM 2ch, 32-96kHz, 16/20/24-bit
Multichannel Linear PCM 6ch, 32-96Hz, 16/20/24-bit
Bitstream Dolby DigitalDolby Digital EXDTS, DTS ES, DTS 96/24

Immersive Surround Sound: The Marantz 7012 AV receiver goes beyond regular surround with the latest immersive surround sound formats, including Dolby Atmos,  DTS:X, & AURO-3D.

  • Dolby Atmos: Dolby Atmos surround sound technology dispenses with channel-based coding in favor of more advanced object-based coding, giving the soundtrack designer the ability to precisely place sounds anywhere in the 3-dimensional space. Now you can enjoy this same award-winning technology at home with the 7012 that lets you to connect a 5.1 or 7.1 surround sound speaker system and 2-4 additional overhead speakers or 2-4 Dolby Atmos elevation speakers for the ultimate home theater experience.
    • A 5.1.2 configuration is based on a traditional 5.1 speaker layout complemented by 2 overhead or Dolby Atmos-enabled speakers.
    • A 5.1.4 configuration is based on a  traditional 5.1 speaker layout complemented by 4 overhead or Dolby Atmos-enabled speakers.
    • A 7.1.2 configuration is based on a more advanced 7.1 speaker layout complemented by 2 overhead or Dolby Atmos-enabled speakers.
    • A 7.1.4 configuration is based on a more advanced 7.1 speaker layout complemented by 4 overhead, or Dolby Atmos-enabled speakers (two of the overhead or Dolby Atmos-enabled speakers must be powered by an external 2ch amp).
  • DTS:X: The latest immersive surround sound system, DTS:X features object-based audio coding that lets the soundtrack designer place sonic elements anywhere in the 3D acoustic soundspace, and provides for overhead speakers to deliver a stunning surround sound experience. Along with DTS:X decoding, the 7012 features DTS-HD Master Audio decoding and other DTS audio technologies.
  • AURO-3D: This receiver is equipped with an Auro-3D decoder. With Auro-3D, Front Height, Surround Height and Top Surround are added to a conventional 5.1-channel system to achieve a natural and realistic soundfield that is three-dimensional and fully immersive. You will be able to fully enjoy Auro-3D playback if you properly place the speakers for Auro-3D. Auro-3D does not support a Dolby Atmos configuration using Top Front, Top Middle, Top Rear, or any Dolby Atmos Enabled speakers. But it is possible to support both an Auro-3D and Dolby Atmos by adding Front Height and Rear Height speakers to a 5.1 configuration. For an optimum Auro-3D experience Surround Height speakers are strongly recommended.

Post Decoding Formats: The Marantz AV receiver supports Dolby Surround & DTS Neural:X to enhance 2-channel and multichannel decoding formats. It will also be able to support DTS Virtual:X through a future firmware update (no ETA).

  • Dolby Surround: Dolby Surround offers an enhanced cinema experience to your 2ch or multichannel movie soundtracks using your existing 5.1ch, 7.1ch, or Dolby Atmos speaker setup. Dolby Surround enhances audio definition by improving the spatial dimension and overall audio definition of movie soundtracks. It does this by using four distinct surround zones that provide greater control over the exact placement of each detail in a movie sound track, so audio can be matched more accurately to the video on screen; this means more depth and greater realism for your movies. As a result, individual sounds are clearer and more distinct. It also improves the surround sound experience across the entire theater by widening the listening "sweet spot".
  • DTS Neural:X: Further, DTS:X incorporates Neural:X, the latest spatial remapping technology from DTS, which provides a fully immersive output for all types of source content; this includes DTS bitstreams and non-encoded (PCM) data. Neural:X delivers a thrilling sense of immersive sound to your speaker layout regardless of the original source format.
  • DTS Virtual:X (via Future Firmware Update):DTS Virtual:X bridges the gap between DTS:X and the reality of so many consumers' homes, allowing you to enjoy multi-dimensional sound regardless of room size, layout, or speaker configuration. DTS Virtual:X can be used with any content (from 2ch to 5.1ch soundtracks), while delivering virtual height & virtual surround processing based on psychoacoustics (not reflective surfaces).

Audyssey Platinum: The Marantz SR7012 features the Audyssey Platinum suite of powerful DSP features - including MultEQ XT32, Sub EQ HT, LFC (Low Frequency Containment), Dynamic Volume, and Dynamic EQ.

  • MultEQ XT32: Via the supplied measuring microphone, Audyssey MultEQ32 measures all the speakers in your home theater during setup, including the subwoofer, and then generates multiple high precision DSP room acoustic correction filters, which together provide smoothest and most natural tonal balance, regardless of the brand or model of the various speakers. Audyssey MultEQ32 incorporates Up to eight listening positions can be measured, configured, and recorded. MultEQ XT32 compensates for both time and frequency characteristics of the listening area based on "Audyssey Setup" measurement results. Selection is done from three types of compensation curves - Reference (default and recommended, L/R Bypass, Flat, and Off).
  • Sub EQ HT: Audyssey Sub EQ HT provides individual DSP tailoring of each subwoofer in a dual subwoofer setup, for deeper bass with improved definition, compared to a single subwoofer configuration.
  • LFC (Low Frequency Containment):Audyssey Low Frequency Containment uses advanced psychoacoustic algorithms to deliver a full range tonal balance, including deep bass, but without disturbing close-by neighbors or family members in other rooms, and features a multi-step adjustment that lets you dial in the amount of containment to your preference.
  • Dynamic Volume: Audyssey Dynamic Volume features advanced psycho-acoustic processing to deliver clear dialog and wide range sound at reduced volume levels so that you can enjoy theater-level clarity at whatever listening level you choose.
  • Dynamic EQ: Audyssey Dynamic EQ also features advanced DSP processing to deliver full range wide-band response, even at reduced volume levels. Dynamic EQ Reference Level Offset provides three offsets from the film level reference (5 dB, 10 dB, and 15 dB) that can be selected when the mix level of the content is not within the standard.

Direct Listening Modes: The Marantz 7012 offers two Direct Listening Modes which bypass the receiver's tone & DSP processing for higher sound quality performance. Source Direct provides playback of 2ch or Multichannel audio in its original form, without any surround or tone processing. Pure Direct  goes a step further by turning off the receiver's display and analog video circuitry to minimize the possibility of any noised being added to the audio signal.

Stereo Modes: The Marantz 7012 surround receiver also provides two-channel stereo and multi-channel stereo playback, as well a virtual surround from two stereo speakers. The 2CH Stereo mode is for playing in two channel stereo; bass and treble can be adjusted and sound is output from the front left and right speakers, along with a connected subwoofer. Multi-Channel Stereo mode lets you enjoy stereo sound from all speakers. Virtual Speaker mode lets you enjoy surround effects using only the front speakers or headphones.

Audio Enhancements: The Marantz 7012 receiver provides various audio enhancements to deliver a high-quality listening experience every time.

  • CINEMA EQ (Cinema Equalizer): The Cinema EQ function gently decreases the level of the extreme high frequencies, compensating for overly-bright sounding motion picture soundtracks. Select this function if the sound from the front speakers is too bright. This function only works in the Dolby Digital, DTS, Dolby Pro Logic (including PL II, PL IIx, PL IIz), and DTS Neo:6 modes.
  • M-DAX: Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals.
  • Dynamic Range Compression (DRC): Motion picture soundtracks have tremendous dynamic range (the contrast between very soft and very loud sounds). For listening late at night, or whenever the maximum sound level is lower than usual, Compressing the dynamic range allows you to hear all of the sounds in the soundtrack with reduced dynamic range. DRC works when playing program sources recorded in Dolby Digital or DTS.
  • Center Spread: When using the receiver's Dolby Surround mode, the Center Spread function expands the center channel signal to left and right front speakers to create a wider frontal audio image for the listener. It is optimized and designed primary for playback of stereo music content.

Level Adjustments:  The 7012 provides the following level adjustments.

  • Source Level: This function adjusts the playback level of the currently selected input source's audio input. Use this feature if there are differences in the input volume levels between different sources. You can correct the playback level of the audio input from -12 to +12dB.
  • Dialogue Level & Control: You can adjust the output level (+/-12dB) to increase the dialogue output from the center channel. When listening to a DTS:X soundtrack, the Dialog Control feature adjusts the volume of dialog in movies and vocals in music, so voice can be heard more easily.
  • EQ Level: If you choose not to use the Audyssey MultEQ X32 auto calibration setup function, you can manually set the tonal balance and level for each frequency band of the receiver's 9-band EQ (63/125/250/500/1k/2k/4k/8k/16k Hz) for each connected loudspeaker.
  • Subwoofer Level: You can set the receiver's subwoofer output level (+/-12dB) independent from the other speaker levels and system's main volume.

Volume Settings: The 7012 offers the following volume settings.

  • Volume Scale: You can choose to display an Absolute volume scale (0-98) or Relative volume scale (-79.5 to 18dB).
  • Volume Limit: You can set a maximum volume level of 0dB (80), -10dB (70), or -20dB (60) to limit the receiver's total volume output.
  • Turn-On Volume: You can define the volume setting that is active when the power is turned on (0, 1-98, -79 to +18dB, or Last)
  • Mute Level: You can set the amount of attenuation for the audio muting circuit; -40dB or -20dB below current volume, or full mute (sound turned off entirely).

Audio Outputs: The Marantz AV receiver features color-coded binding-post speaker terminals, 7.2ch pre-outs, and a front-panel headphone jack.

  • Color-Coded Speaker Terminals: The receiver has binding-post terminals for all speaker connections. The binding-post terminals can accept bare wire, pin connectors, and banana plugs (single/dual). The receiver will accept speaker impedances of 4 to 16-ohm. The AV receiver comes with color-coded labels to easily identify which channel a speaker cable should be connected to. Since the speaker cables have labels in the same colors as the connectors on the 7012's rear panel, there's no longer any confusion about which terminals they should be connected to.
  • 11.2Ch Pre-Outs: The AV receiver features 11.2ch pre-amp outputs (Front L/R, Center, Surround L/R, Surround Back L/R, Height 1 L/R, Height 2 L/R, and Dual Subs) for connection to external power amplifiers. The pre-outs are variable. For compatibility with dual subwoofer home theater systems, the SR7012 features two discrete subwoofer outputs. With dual subwoofers, which can be placed in different parts of the room, you'll benefit from response averaging, which helps provide smoother and more detailed deep bass, compared to a conventional single subwoofer speaker system.
  • Headphone Jack: When headphones are plugged into the full-size 1/4" jack on the front panel, all the speakers are automatically muted.

Phono Input: The Marantz SR7012 is fitted with a Phono input (MM), so you can connect your turntable and listen to your vinyl records with high-quality sound.

7.1 Channel Input: The SR7012 features a 7.1 Channel input (Front left, Front right, Center, Surround left, Surround right, Surround Back left, Surround Back right and Subwoofer) for connecting a DVD Audio player, Super Audio CD multi-channel player, or other component that has a multi-channel port so you can playback the audio with 5.1 channel or 7.1 channel surround sound. If you will not be using the 7.1 channel input with a multi-channel decoder, you can use the front and left inputs as an auxiliary input.

Video Features

HDMI 2.0b: Featuring eight HDMI inputs (including one conveniently located on the front-panel) and three HDMI outputs, the 7012 incorporates an advanced video section that features the latest HDMI 2.0b specification, including support for 4K/60 Hz Ultra-HD video, BT.2020 Wide Color Gamut, High Dynamic Range (HDR), 4:4:4 Pure Color sub-sampling and 21:9 video pass-through, along with support for 3D content. The 7012 also features HDCP 2.2 compatibility, a requirement for 4K Ultra HD copy-protected content.

  • 4K/60Hz Pass-Through: The 7012 supports up to 4K (3840x2160 pixels) video @ 60 frames per second on all of its HDMI inputs and output (pass-through only). It will also pass a 480i, 480p, 720p, 1080i, or 1080p video signals via HDMI
  • HDCP 2.2: All of the receiver's HDMI jacks support HDCP 2.2, which fully complies with the latest copyright protection standard for 4K video transmission.
  • 4:4:4 Color Subsampling: All of the receiver's rear-panel HDMI jacks support RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0 color subsampling (@ 60Hz or 50Hz). With 4:4:4 color subsampling, luminance (brightness) and chroma (color) are sampled at the same rate; resulting in an RGB color palette as big as the video sampling rate for a video image with more colors, plus greater color accuracy and detail. The front-panel HDMI only supports 4K 60/50Hz using format YCbCr 4:2:0 only.
  • Wide Color Gamut (BT.2020): The BT.2020 color standard delivers a much wider color gamut and represents about 75% of the total visual color spectrum, while the current Rec. 709 color standard selected as the color space for HDTVs and early generation 4K Ultra HDTVs covers only 35% of the total visual color spectrum.
  • 21:9 Aspect Ratio: By supporting 21:9 aspect ratio, this receiver can show films recorded in the Cinema Scope format on your TV for a much more immersive video experience. When these types of films are viewed in the usual 16:9 ratio, you see black bars at the top and bottom of the screen; 21:9 eliminates these bars.

HDR Compatibility: HDR provides enhanced picture quality by simultaneously enabling greater detail for both the dark and bright parts of an image. HDR reproduces a greater dynamic range of luminosity or brightness levels, creating greater contrast. This increased contrast reveals the subtle nuances of the image, from detailed blacks and shadows to the brightest whites and colors, plus greater depth. The receiver supports HDR 10, Dolby Vision, and HLG (via future firmware update).

  • HDR 10: HDR 10 is an open standard and currently the most popular HDR format on the market. It supports 10-bit color and 1,000 nits. It uses static metadata at the start of a movie to tell the receiver and your TV that the video content is encoded using HDR.
  • HLG (via Future Firmware Update): HLG (Hybrid-Log Gamma) is primarily designed for live video feed and over-the-air broadcasts. It uses no pre-encoded metadata and is backwards compatible with SDR. HLG's native compatibility allows much of today's existing SDR infrastructure to be re-used for HDR in the future.
  • Dolby Vision: Unlike HDR 10 which contains static metadata and HLG which uses no metadata, Dolby Vision utilizes dynamic metadata which adjusts brightness, color, and contrast automatically for each scene. Dynamic metadata carries information that maps every image to your TV's display capabilities, so you see more of what the content creator intended. Dolby Vision supports 12-bit color and 10,000 nits.

4K Video Upconversion & Upscaling: The Marantz AV receiver's sophisticated video processor  provides upconversion from standard definition (480i/480p) and high definition (720p/1080i/1080p) sources to 4K Ultra HD (3840x2160 pixels), which lets you connect all your analog (composite/component) or digital (HDMI) video sources to the SR7012 and then connect to your TV with just a single HDMI cable. Only the receiver's main HDMI output supports video upconversion.

Note: When composite or component video signals are used, only 480i video signals are converted to HDMI (up to 4K).

Three HDMI Outputs: The two parallel HDMI outputs distribute the same video signal simultaneously to two separate displays, while the discrete HDMI output allows you to play a different audio/video source in another zone (Zone 2).

Other HDMI Features: The Marantz 7012 AV receiver's HDMI connectivity also offers 3D video pass-through, ARC (Audio Return Channel), Deep Color & x.v.Color support, as well as an auto LipSync function.

  • 3D Ready: The 7012 AV receiver supports 3D video pass-through (720p/1080p only) from connected 3D-compatible Blu-ray, games and broadcast devices to 3D-compatible HDTVs (all 3D components must be connected via HDMI). Special eyewear will be required for viewing 3D content.
  • ARC (Audio Return Channel): This feature of the 7012's main HDMI monitor output allows audio to be sent from your compatible HDTV to the receiver through the same HDMI cable already being used to send audio and video to your HDTV. This eliminates the need for extra cables connected to your television.
  • Deep Color & x.v.Color Support: The AV receiver supports Deep Color and x.v.Color content, which can display a larger color range than standard-definition schemes. The result is a more lifelike, vibrant picture
  • LipSync: This function adjusts the delay between audio and video output. You can do this manually or have the receiver set the LipSync function automatically. When connected to a TV via HDMI the receiver automatically adjusts audio output timing (0-500ms) if the TV supports an automatic LipSync function. You can also manually delay the sound output up to 500ms to synchronize it with the video image.
Note: The receiver will support eARC (Enhanced Audio Return Channel) via a firmware update (no ETA yet). eARC will support uncomprerssed audio formats like Dolby TrueHD, Dolby Atmos, DTS:X, & DTS HD Master Audio - where standard ARC was limited to Dolby Digital, Dolby Digital Plus, DTS, DTS HD, and PCM.

HDMI Standby Pass-Through: When the AV receiver is in "Standby" mode and the HDMI Standby Pass-Through function is enabled, both audio/video streams from the receivers HDMI input will be output to your television, via the AV receiver's HDMI monitor output. Once the receiver is turned "On", only video will pass through the monitor output to your TV and the audio is directed to the receiver's speaker outputs.

  • HDMI Input: Selects the HDMI Input for which the HDMI Standby Pass-Through function is enabled.
  • Last: The HDMI Standby-Through function is activated on the input source selected at the time of setting the AV receiver to the "Standby" mode.
  • Off: The HDMI Standby Pass-Through function is disabled.

Component & Composite Video: The receiver features four composite video inputs (3 rear/1 front) and one composite video output, as well as a Zone 2 composite video output (the composite video inputs/output support 480i only). There are also two component video inputs and one component video output that can be assigned as a monitor output or Zone 2 output (the component video inputs/output support up to 1080p).

Advanced ISFccc Video Calibration: The 7012 is certified by the Imaging Science Foundation to deliver top video quality, and the unit also features advanced ISFccc video calibration controls that allow for precision fine-tuning of the connected HDTV, even if it's not an ISF certified set. You can choose from a variety of Picture Modes - Standard, Movie, Vivid, Streaming, ISF Day, ISF Night, Custom, or Off. The Custom mode lets you manually adjust Contrast, Brightness, Saturation, Noise Reduction, and Enhancer (sharpness).

Video Modes: You can set the video processing method to match the type of video content. Choose from Movie, Game, Auto, or Bypass.

Video Select Function: This receiver can display video from a different source on your connected TV during audio playback from Tuner or HEOS music apps.

Network & Tuner Functions

Wired or Wireless Network Connection: The Marantz 7012 receiver is fitted with a RJ-45 Ethernet (LAN) port to connect the receiver to your home network. The unit  also offers built-in WiFi (IEEE 802.11 a/b/g/n; 2.4/5GHz) for a wireless network connection; WPS, WEP, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (AES) security protection is supported. Either network connection gives the receiver access to HEOS music apps (like Pandora, Spotify, Tidal, etc), TuneIn, your music library on your Apple iOS or Android device, as well as music content on your Windows PC or DLNA music server. Wireless network setup can be done via WPS button, Access Point Scan, Manual Setting, PIN Code, or even through your Apple iOS device (5.0+).

Note: Network setup requires that the receiver be connected to your TV via HDMI for display of the on-screen menu. The receiver's network setup cannot be accessed through its front-panel display.

TuneIn Internet Radio: The Marantz 7012 includes access to more than 100,000 free internet radio streams from all corners of the globe via the built-in TuneIn online music service. Simply select TuneIn from the receiver's on-screen menu using the included remote and browse among the 100,000 stations neatly organized into popular categories and select a station that appeals to you. 

Spotify Connect: If you subscribe to Spotify Premium and have the Spotify App on your Apple iOS or Android mobile device, you can stream Spotify to the Marantz AV receiver. Spotify is a digital music service that gives you on-demand access to one of the largest music libraries in the world (over 15 million tracks and counting). Spotify makes it easier than ever to discover, manage, and share music with your friends. You can browse music by artist, album, track, or most popular; and create your own music library with customized playlists.

HEOS Music Apps: With built-in HEOS technology and the HEOS app on your Apple iOS 7.0+ or Android OS 4.0 devices, you'll be able to stream a wide variety of online music services, plus the music library of your mobile device through the Marantz AV receiver.

  • Online Music Services: Using the HEOS app, you'll be able to stream your favorite online music service likePandoraiHeart RadioSiriusXMTIDALNapsterTuneIn, andAmazon Music. The HEOS app on your Apple iOS or Android device will serve as the controller for these apps and provide song/artist information with Album Art. You can create a "Favorite" station list, so you can quickly access your favorite internet radio stations and online music channels.
  • Mobile Device Streaming: Using the HEOS app on your Apple iOS or Android mobile device, you are able to stream your device's music library to the Marantz AV receiver. You'll be able to browse your music library by Artist, Album, Genre, and Song; control music playback functions like Play/Pause and Previous/Next Track; and view song/artist info with Album Art from the app on your compatible mobile device. You can even type in an artist name or song title to find music in your mobile device's library.

Notes:

  • Prior to using the HEOS system, you'll need to setup up your free HEOS account. Your HEOS account remembers all your settings and preferences such as all your music service logins and HEOS playlists. When you'd like to add multiple smartphone or tablet controllers to your system, you only need to sign in to each new device with your HEOS user name and password. Instantly all your music services and HEOS playlists are available in the new controller too.
  • If you prefer, HEOS supports multiple accounts in a single household. This way, each family member can enjoy their own personalized Pandora, Spotify, or other online music account settings and still share all the same speakers in the home.

DLNA 1.5 Certified: The 7012 is DLNA (Digital Living Network Alliance) 1.5 and Windows 7/8 compliant for audio and photo networking. This means it's easier for you to access and enjoy digital music and still-images (JPEG) stored on your Windows PC. You can use your PC to play high-bit rate music content through the A/V receiver and view still-images on your connected TV, or use the 7012's remote control to browse music & photo files on your hard drive. The receiver also supports ID3-Tag (ver.2) and META tag information; so song title, artist name, and album name can be displayed the unit's front-panel display or on-screen menu. In addition the unit will display Album Art on a connected television. The Marantz 7012 supports the following audio formats, sampling frequencies, and bit rates via its wired network connection.

Resolution Compatible Audio Formats Sampling Frequencies Bit rate Extension
Hi-Res WAV (PCM) 32/44.1/48/96/176.4/192 kHz 16/24-bit .wav
FLAC (Free Lossless Audio Codec) 32/44.1/48/96/176.4/192 kHz 16/24-bit .flac
ALAC (Apple Lossless Audio Codec) 32/44.1/48/96/192 kHz 16/24-bit .m4A
DSD 2.8/5.6 MHz 1-bit .dsf/.dff
Compressed MP3 (MPEG-1 Audio Layer-3) 32/44.1/48 kHz 32-320 kbps .mp3
WMA (Windows Media Audio) 32/44.1/48 kHz 48-192 kbps .wma
AAC (MPEG-4) 32/44.1/48 kHz 16-320 kbps .aac/.m4a

Note: Your computer must meet the following system requirements - Windows Media Player Network Sharing Service or Windows Media DRM10. Album Art is only displayed when using Windows Media Player (ver.11/12).

AM/FM Tuner: The Marantz AV receiver features a built-in AM/FM tuner with 56 station auto-preset memory tuning. You can also set your presets manually. You can create an 8-character name for each preset station. You can even directly enter a station number using the receiver's on-screen menu and remote control.

Software Updates: Using the receiver's network/internet connection, you can check for and update the latest firmware from the online Marantz server. Visit Marantz's Owner's Circle for access to downloads to keep the Marantz receiver up-to-date.

USB/AirPlay/Bluetooth Integration

Front-Panel USB Port: This AV receiver is equipped with a front-panel USB (type-A) port that allows you to enjoy a variety of music files from a USB mass storage class memory device; such as a USB thumbdrive or portable digital audio player. Compatible USB storage devices must be formatted in FAT 16 or FAT32. The unit can recognize up to 500 folders/5,000 files. You can use the receiver's on-screen menu (via HDMI) and remote control to navigate your stored music files on your connected USB memory device. Song/artist information will display on your HDMI-connected TV and the receivers front-panel display. USB portable audio devices that can be charged via USB will be charged when plugged into the AV receiver's USB port (5V/1A); even in standby mode.

Resolution Compatible Audio Formats Sampling Frequencies Bit rate Extension
Hi-Res WAV (PCM) 32/44.1/48/96/176.4/192 kHz 16/24-bit .wav
FLAC (Free Lossless Audio Codec) 32/44.1/48/96/176.4/192 kHz 16/24-bit .flac
ALAC (Apple Lossless Audio Codec) 32/44.1/48/96/192 kHz 16/24-bit .m4A
DSD 2.8/5.6 MHz 1-bit .dsf/.dff
Compressed MP3 (MPEG-1 Audio Layer-3) 32/44.1/48 kHz 32-320 kbps .mp3
WMA (Windows Media Audio) 32/44.1/48 kHz 48-192 kbps .wma
AAC (MPEG-4) 32/44.1/48 kHz 16-320 kbps .aac/.m4a

Note: The receiver's USB port is not compatible with Apple iPod/iPhone/iPad or Android smartphones & tablets.

Apple AirPlay: AirPlay lets you stream your favorite songs directly from your Apple iOS (4.3.3+) device or from your iTunes (10.2.2+) library on your Windows PC or Mac computer to the AV receiver, over your home's wireless network connection. From your Apple iOS device you are able to stream stored music on your device, downloaded music apps, and music on your iCloud to the AV receiver. From your Windows or Mac you can stream your stored iTunes music library on your computer to the AV receiver; you can even download Apple's free Remote App onto your compatible iOS device to browse and control playback functions of the music stored in your iTunes music library on your computer that is being streamed to the AV receiver. With AirPlay you also get to see song/artist information and album art via the receiver's on-screen menu (via HDMI).

Built-in Bluetooth: The Marantz 7012 features built-in Bluetooth (version 3.0+EDR) with a 98' wireless range for music streaming (A2DP 1.2) and control (AVRCP 1.5). You'll be able to wirelessly stream stored music and music apps from your Bluetooth-enabled smartphone, tablet, computer, laptop, and more to the Marantz AV receiver. You will also be able to control basic playback functions (Play/Pause & Previous/Next Track) using the receiver's remote. Advanced music operation and song/artist/album info will still be done from your Bluetooth source device. Up to eight Bluetooth devices can be paired the 7012, but only one device can be connected and used at a time.

Note: Due to the differences in Bluetooth technology, some Bluetooth enabled devices may be incompatible, function improperly, or may not support all features when used with the Marantz AV receiver.

Multiroom Playback

HDMI Zone 2: The SR7012 also incorporates multi-zone HDMI audio/video distribution for Zone 2 with the inclusion of its HDMI matrix switching functionality. The receiver can send two different HDMI video feeds to two displays at the same time directly from the receiver. HDMI Zone 2 also supports 2ch PCM audio from the HDMI input source selected. The HDMI Zone 2 function is only compatible with the HDMI 1-7 input connectors. It is not compatible with the HDMI 8 input connector or any other input source. Volume of HDMI Zone 2 is controlled from the TV or additional receiver in Zone 2.

Note: If the receiver's Main Zone and HDMI Zone 2 are set to the same HDMI input source, the Main Zone audio will be mixed down to 2-channel audio.

Zone 2 (Audio/Video): Zone 2 allows stereo audio/video playback of another source connected to the receiver in another room of your home via RCA line-level output or speaker-level output, as well as composite or component video. To enjoy a video source in Zone 2, you must connect the same video connection to your second display monitor as connected to your receiver for that particular source (there is no video-conversion for Zone 2). When using the SR7012 to power speakers in a second room of your home, the main zone is restricted to 9.2-channels. When using the receiver's line output terminals for the second room you need an additional amplifier to power your Zone 2 speakers; the main Zone of the receiver remains 11.2-channel. The volume of Zone 2 can be controlled by the Marantz receiver using either configuration or from your add-on amplifier when using the line-output.

  • Compatible Sources:
    • HDMI audio (2ch PCM only)
    • Optical/Coaxial digital inputs (2ch PCM only)
    • Analog audio/video
    • AM/FM Tuner (cannot select different stations for each zone)
    • USB & Bluetooth
    • Network sources (AirPlay, TuneIn Internet Radio, Spotify Connect, HEOS Music apps, & DLNA); the same network source is played in Zone 1 and Zone 2
  • Incompatible Sources:
    • HDMI video
    • DSD audio files
Note: Unfortunately, you cannot select USB, Bluetooth and Network sources exclusively for each Zone. For example, if you select a network source for Zone 2 when a USB source is selected for the Main Zone, the input source in the Main Zone also switches to the same network source as Zone 2.

Zone 3 (Audio Only): Zone 3 allows you to play a different stereo audio source connected to the receiver in a third room of your house. Zone 3 features either a pre-outs or speaker outputs so you can use this amp or a separate amp to power speakers in another room. When using the SR7012 to power speakers in a second and third room of your home, Zone 2 and 3 are limited to mono playback, while the Main Zone is limited to 9.2 channels. When using the receiver's pre-outs for the 2nd & 3rd Zone, you need additional amplifiers in those rooms to power those speakers; the Main Zone of the receiver remains 11.2-channel. The volume of Zone 3 can be controlled by the Marantz receiver using either configuration or from your add-on amplifier when using the line-output.

  • Compatible Sources:
    • Optical/Coaxial digital inputs (2ch PCM only)
    • Analog Audio Inputs
    • AM/FM Tuner (cannot select different stations for each zone)
    • USB & Bluetooth
    • Network sources (AirPlay, TuneIn Internet Radio, Spotify, Connect, HEOS Music apps, & DLNA); the same network source is played in Zone 1 and Zone 2
  • Incompatible Sources:
    • HDMI Audio/Video
    • Analog Video
    • DSD audio files
Note: Unfortunately, you cannot select USB, Bluetooth and Network sources exclusively for each Zone. For example, if you select a network source for Zone 3 when a USB source is selected for the Main Zone, the input source in the Main Zone also switches to the same network source as Zone 3.

All Zone Stereo Function: The All Zone Stereo function allows you to enjoy the AV receiver's Main Zone audio source in Zone 2 and Zone 3 simultaneously (regardless of input audio signal types - analog, digital, or wireless). During the All Zone Stereo mode, only the "Multi Ch Stereo" and "Stereo" sound modes can be selected. You will have independent volume control in each zone. All Zone Stereo mode is useful when you want to enjoy the same music at the same time in multiple rooms during a get together or party.

HEOS Wireless Multiroom Audio: Built-in HEOS technology enables the SR7012 to become part of the HEOS by Denon wireless multi-room audio eco-system, allowing you to stream and control all of your local and online music effortlessly from anywhere in your home with the HEOS App on your compatible Apple iOS or Android mobile device over a wireless WiFi network connection. The HEOS system is a true multi-room audio system that automatically synchronizes audio playback between multiple HEOS devices so that your music (up to 24-bit/192kHz Hi-Res audio) coming from different rooms is perfectly in sync and always sounds amazing. You can play the same audio source (other than your connected TV) in every room or any combination of rooms you choose, including a different song in every room.

  • Systems: The HEOS wireless multi-room sound system by Marantz can support up to 32 HEOS speakers, receivers, amplifiers, and/or pre-amplifiers (all sold separately) on a single wireless network (IEEE 802.11 g/n; 2.4/5GHz).
  • Sources: The following sources can be distributed through the HEOS multi-room audio system - Receiver's analog, HDMI, & optical/coax digital inputs; built-in AM/FM tuner and TuneIn Internet Radio, HEOS music apps & Spotify Connect; Windows PC & DLNA music servers; Bluetooth & USB audio; plus music libraries stored on your Apple iOS or Android mobile device. HEOS wireless multiroom audio does not support AirPlay.
  • Groups: You can join or group up to eight individual speakers or amplifiers into a group of speakers that function as if they were a single speaker. The HEOS App is also flexible enough where you can create up to 16 Groups (2 speakers/amplifiers per Group).
  • Party Mode: You can easily group 16 rooms together into Party Mode by using a "pinch" gesture.
Note: The Marantz AV receiver only supports a single HEOS music stream. If you desire a second HEOS music stream through the receiver's multizone output, you will need to connect the HEOS Link to one of the AV receiver's analog inputs.

HDMI Monitor 2: The receiver's second HDMI monitor output lets you send the same HDMI audio/video input signal that is being played in the main zone to a second zone (video is output at the resolution supported by both TVs).

Remote & App Control

AVR Remote App: The new Marantz AVR Remote App lets you control the Marantz 7012 AV receiver using your Apple (iOS 7.0) or Android (OS 4.0+) device. From this free app on your compatible Apple iOS or Android device, you'll be able to control the Marantz AV receiver's basic functions; such as power, volume, input, surround modes, and other settings. You'll also be able to control separate Zones of the receiver, as well as navigate the AV receiver's network and Internet content from the app. In addition, you get you get unique features likes a landscape orientation control screen for tablet devices, the ability to create playlists, and control over a Marantz Blu-ray player.

  • Landscape Orientation Control Screen: With a landscape orientation control screen for tablet devices, you can easily browse and navigate through your network music services or personal digital music collection with ease, and at the same time view now-playing information and cover art all on a single screen.
  • Create Playlists: The app's playback screen allows you to easily build your own personal music playlists on the fly with the ability to Drag & Drop files into your queue, or tap to "Play Now", "Play Next", "Play Next and Replace Queue" or "Add to End of Queue". You can then save your queue as a playlist for easy recall.
  • Marantz Blu-ray Player Control: The app allows control over select Marantz Blu-ray players (UD7007/5007) that are connected to the AV receiver via HDMI.

Note: This AV receiver is not compatible with last year's older Marantz Remote App.

HEOS App: You'll need to download the HEOS App onto your Apple iOS 7.0+ or Android OS 4.0 device to enjoy HEOS functionality on the 7012 receiver. Using your mobile device and the HEOS app, you can setup, browse, explore, and control HEOS system right in the palm of your hand, from anywhere in your home. Your compatible Apple iOS or Android device must be connected to the same home wireless (WiFi) network as the AV receiver and your entire HEOS system. The HEOS app consists of 4 control screens.

  • Settings: The "Settings" screen enables you to connect one or more HEOS speakers, receivers, amplifiers, and/or pre-amplifiers to your home's wireless network.
  • Rooms: From the app on your Apple iOS or Android device, you can select which rooms you want playing. You can play the same music in multiple rooms by grouping rooms together, or you can listen to a different source in each room.
  • Music/Sources: You can select what music and which source you want to listen to from the app. Choose from online music services like Pandora, Spotify, TuneIn, Tidal, etc.; your music library on your Apple iOS or Android device, Windows PC/DLNA server, or USB thumbdrive; and analog inputs; as well as Bluetooth on the HEOS AVR. You can also select music from Playlists you've created, Favorites you've saved, and your recent listening History.
  • Now Playing: The "Now Playing" screen displays song, artist, and album information; along with Album Art. You also get basic playback controls like Play/Pause and Previous/Next Track, plus Volume controls Up/Down and Mute. In addition the "Now Play" screen functions unique to the selected online music service or music library.

Alexa Compatible (via firmware update): Through a network firmware update, HEOS and Amazon Alexa customers can now enjoy the convenience of Alexa voice control plus high-quality wireless home audio. In addition to controlling your HEOS components with the HEOS app on your mobile device or tablet, you can now control them with Amazon Alexa voice technology and an Amazon Alexa device (including the Amazon Echo, Echo Dot, Tap and Echo Show - all sold separately). Voice control features include -

  • Alex voice commands include Volume (up/down, specific volume number, & mute); Playback (Play, Pause, Stop, Next, Previous, Resume); and Power on/off. The HEOS Bar and HEOS AVR even support HDMI switching (1-4) through Alexa voice command.
  • You can group your HEOS-enabled devices using the HEOS app with an Alexa-friendly name. Once they are grouped, Alexa voice commands will control the group as a whole. If you want to play audio content from only one HEOS-enabled device in the group, you must ungroup the device within the HEOS app.
  • Through a future firmware update (no eta), soon you will be able to use voice commands to search for songs, albums and artists and even podcasts and internet stations.
  • For a list of current Alexa voice commands supported by the HEOS HomeEntertainment Skill, click here. 
Note: You will need an Alexa-enabled device (Amazon Echo, Echo Dot, Tap, or Echo Show - all sold separately) to operate your HEOS products via voice-command. Youre HEOS components and the Alex-enabled devices must be on the same network.

MultEQ Editor App: Download the MultEQ Editor App onto your Apple iOS 8.0+ or Android OS 4.0+ devices for further sound customization and detailed tuning to more precisely tailor the sound to your room and personal preferences. This app lets you view the speaker detection results to check correct installation, view before and after results of the Audyssey calibration making it easy to identify room problems, edit the Audyssey target curve for each channel pair to suit your tastes, adjust the EQ frequency adjustment range for each channel pair, switch between 2 high frequency roll-off target curves, enable/disable midrange compensation to make the vocal region brighter or smoother, as well as save and load calibration results.

IR Remote:  The Marantz 7012 comes with an IR remote for wireless operation of the AV receiver. The 7012's can also be used to control select external audio/video components connected via HDMI which support HDMI control. The receiver can even be controlled by your HDMI connected Smart TV.

  • HDMI-CEC: When you make an HDMI connection with a TV or Blu-ray player compatible with the 7012's HDMI control function, you can perform the operations from the 7012's remote control; Power off, Switching of audio output devices, Switching of audio input devices, Volume adjustment, and Playback functions.
  • Smart TV Control: When you connect the 7012 to your Smart TV, you have the option of controlling the 7012 via the TV's remote control which lets you select an input, adjust the volume and choose the surround sound mode. The receiver and your TV must be connected via HDMI with the HDMI-CEC function activated on both components.

Custom Integration: The Marantz 7012 provides advanced remote connectivity and control features often required for custom home integration and theater applications using premium control systems. These features include IP control, a RS232C jack for use with whole house control systems, remote in/out.

Scroll To Top